iceshrimp.net - Link to source
@adam You might be interested to know that I completely replaced the Bell Gigahub modem without any issues this morning. The process is perfectly accessible, other than needing someone to read the ONT ID off the back of your bell modem. You need a router or switch with an SFP+ port. You also need a fan or other active cooling for the fiber module; they run at about 90 degrees. Then I purchased my x-onu-sfpp from fibermall. Once you have these things, you can use these instructions: pon.wiki/guides/masquerade-as-the-bce-inc-giga-hub-with-the-was-110/#purchase-a-was-110-or-x-onu-sfpp

Masquerade as the BCE Inc. Giga Hub with the WAS-110 or X-ONU-SFPP - PON dot WIKI

Masquerade as the BCE Inc. Giga Hub with the WAS-110 or X-ONU-SFPP
pon.wiki
@Adam MacLeod
in reply to 🇨🇦Samuel Proulx🇨🇦

mastodon - Link to source

Adam MacLeod

Cool stuff. Glad you're off that garbage modem. You should notice a huge increase in connection stability. I have two WAS-110 SFP+ modules, so when i upgrade the 8311 firmware, I just pull the fiber, plug it into the second one, connection comes right back up, then I do the firmware upgrade, and then swap the fiber back when its done.
This entry was edited (22 hours ago)
in reply to 🇨🇦Samuel Proulx🇨🇦

mastodon - Link to source

Adam MacLeod

Seems to have slowed down, star its GitHub repo for updates.
github.com/djGrrr/8311-was-110…
Although I'm not sure if that is what's running on your device. But its the custom firmware I'm running.

GitHub - djGrrr/8311-was-110-firmware-builder

Contribute to djGrrr/8311-was-110-firmware-builder development by creating an account on GitHub.
GitHub
in reply to 🇨🇦Samuel Proulx🇨🇦

mastodon - Link to source

Adam MacLeod

Oh yeah, they really do get warm. The chassis is the heatsink, essentially. Some have come up with air cooling solutions, but mine have run without fail for years without active cooling.
As for benefits over PPPoE passthrough, you'll probably notice a bit of a reduction in latency, perhaps 1 MS better. Minor, but a perk.
Certainly the fact that you're in control of everything up to the fiber connector, you can choose when firmware updaes happen, and not Bell. No more modem reboots over night, and even randomly during the day. Oh yeah, and no more incidents of pushing bad configs to a million modems causing them to be down for 8 plus hours, LOL.
I was enjoying the net all through that incident.
Also, may be a good reason to revisit some VLAN snooping to see if IPv6 can be found anywhere.
in reply to Mister Krabs

mastodon - Link to source

Adam MacLeod

No worries. Glad to do my best attempt at describing the process. To be specific, I am describing attaching and detaching an SC-APC connector on the end of an ISP-provided singlemode 125NM fiber line.
So you will note that the connector is square, and if you feel along the sides of the square that naturally face your fingers as you grip the connector, you will feel narrow slits, that should feel like they're for finger usage to loosen or unlock the connector. And this is what happens. You squeeze these tabs inward, and the lock is released. You then pull very gently, very slowly, and very straight with your entire hand, and the connector should slide off the SFP+ module, or out of the modem. The modem will likely be a bit trickier in handling, and may require some effort to unplug the connector. Do your best in gaging if you think you're overdoing something, but at the same time, the modem connector may be stubborn. Most of all, always pull or push connectors straight.
Also, never, under any circumstances that you can control, touch or point the end of the fiber connector at your face or any one elses. Touch should be absolutely limited to necessities, or purposefully destroying a connector. To plug the connector back in, ensure it is aligned with the square receptical, and push gently. If aligned, it will slide a short distance, then lock into place with a bump and a slight click.
Hope this helps some.
in reply to Adam MacLeod

iceshrimp.net - Link to source

🇨🇦Samuel Proulx🇨🇦

No worries! If I wanted it to be private, I’d have sent a dm. What Adam says aligns with my experience. The plug on the modem was extremely stubborn; I had to tug on it harder than I like pulling on any connector, and I had nearly resigned myself to giving up before it finally came out. Even then I was scared I had broken it. As for touching the connector, I was cowardly and had the rubber cover in my hand and ready to go. I put the cover on until I was ready to plug it into the new module.

mastodon - Link to source
I thought I was going to just get up and make a bunch of new AT-SPI releases, but no such luck. I check my email and find that someone tested my latest fix and found that, for Bengali, Orca isn't reading all characters as they are typed. It isn't clear to me if this is a regression or just a bug that has been there all along and that I didn't fix, and I was going to backport my fix to the old stable branches, so now I have to figure out the answer to that before I can proceed.

mastodon - Link to source

Proton Mail Falls Under U.S. Jurisdiction

If you read their Terms of Service, at first glance, they reference the laws of Switzerland. However, because they now have offices in the United States — along with registrations, trademarks, copyrights, and patents in the U.S. — they also cite U.S. laws. The only two countries you'll see mentioned are Switzerland and the United States — nothing else.

Their CEO has, on several occasions, also praised Donald Trump. Additionally, Proton left the Fediverse because they couldn’t silence users there as they have on platforms like Facebook or Reddit. The fact that they’re now trying to silence journalists doesn’t surprise me.

There are better alternatives to Proton Mail.

Tuta — Germany, Europe
tuta.com

Mailfence — Belgium, Europe
mailfence.com

Soverin — Netherlands, Europe
soverin.com

Startmail — Netherlands, Europe
startmail.com

Mailbox.org — Germany, Europe
mailbox.org

#Proton #ProtonMail #ProtonPass #ProtonVPN #ProtonWallet #ProtonDrive #ProtonCalendar #ProtonMeet #ProtonAuthenticator


Your data – under your control.

Your digital workspace with email, cloud, office & meet. Secure & GDPR-compliant for businesses, public authorities and private individuals. ▶ Try us now!
mailbox
#proton #ProtonMail #protondrive #protonpass #protonvpn #protoncalendar #protonwallet #protonmeet #protonauthenticator

mastodon - Link to source

"Apple is about to drop Accessibility Nutrition labels on the App Store, offering users transparency about which accessibility features apps support."

gerireid.com/blog/how-to-add-a…

#apple #a11y #apps #accessibility #appstore


Add an Accessibility Nutrition Label

I've just completed an app audit for an iOS accessibility nutrition label. Here's what I learned.
gerireid.com
#a11y #Accessibility #apple #apps #AppStore
in reply to Michael 🇺🇦

friendica - Link to source

Andreas vom Zwenkauer See

friendica.log

2025-09-13T10:41:17Z app [ERROR]: Uncaught Exception ValueError: "DOMDocument::loadHTML(): Argument #1 ($source) must not be empty" at /content/web/friendica/src/Model/Item.php line 3558 {"exception":"ValueError: DOMDocument::loadHTML(): Argument #1 ($source) must not be empty in /content/web/friendica/src/Model/Item.php:3558\nStack trace:\n#0 /content/web/friendica/src/Model/Item.php(3558): DOMDocument->loadHTML()\n#1 /content/web/friendica/src/Model/Item.php(3481): Friendica\\Model\\Item::replacePlatformIcon()\n#2 /content/web/friendica/src/Object/Post.php(451): Friendica\\Model\\Item::prepareBody()\n#3 /content/web/friendica/src/Object/Thread.php(190): Friendica\\Object\\Post->getTemplateData()\n#4 /content/web/friendica/src/Content/Conversation.php(666): Friendica\\Object\\Thread->getTemplateData()\n#5 /content/web/friendica/src/Content/Conversation.php(569): Friendica\\Content\\Conversation->getThreadList()\n#6 /content/web/friendica/src/Module/Profile/Conversations.php(228): Friendica\\Content\\Conversation->render()\n#7 /content/web/friendica/src/Module/Profile/Index.php(79): Friendica\\Module\\Profile\\Conversations->content()\n#8 /content/web/friendica/src/BaseModule.php(236): Friendica\\Module\\Profile\\Index->content()\n#9 /content/web/friendica/src/App.php(668): Friendica\\BaseModule->run()\n#10 /content/web/friendica/index.php(32): Friendica\\App->runFrontend()\n#11 {main}"} - {"file":null,"line":null,"function":null,"request-id":"68c54a4ca1c51","stack":"ErrorHandler::handleException (114), ErrorHandler::Friendica\\Core\\Logger\\Handler\\{closure}","uid":"b9e0be","process_id":1453}

#1

mastodon - Link to source

#serviceToot one of the mirrors at #IzzyOnDroid had a power outage, and is currently in recovery (file system repair) – the USV didn't like to be triggered 3 times in a row 🙈). Good thing there are multiple mirrors, so you shouldn't even notice it – unless you pinned your client to our US mirror…

You can watch the state at our monitor, and thus see when the mirror recovered:

monitor.izzysoft.de/

(one of our builders was affected too – but as with the mirrors, we luckily have more than one)

IzzyOnDroid

Welcome to the official IzzyOnDroid Status Page. This page contains an overview of the status of various IzzyOnDroid services and the official mirrors. I
monitor.izzysoft.de
#serviceToot #izzyondroid

Sylvia reshared this.

in reply to Bodo

mastodon - Link to source

IzzyOnDroid ✅

@Bodo Danke Bodo! Den meisten Stress damit hatte Andrew, der die Server in den US betreut. Und ja, Murphy hat natürlich zur passenden Unzeit (Dinnertime) zugeschlagen. Wir hoffen jetzt, die letzten Rätsel bzgl. unseres Buildservers noch zu lösen – und auch das bleibt leider wieder größtenteils an Andrew hängen, wir können von hier aus nur mit "SchauMalObsJetztGeht" helfen, da wir den Server derzeit nicht erreichen können, obwohl er fein läuft… Verrücktes IT Zeugs das…
@Bodo
in reply to IzzyOnDroid ✅

mastodon - Link to source

Bodo

Danke dir für den kurzen Einblick! Dann erweitere ich meine Wünsche für einen entspannten und erholsamen, sonnigen Sonntag für Andrew gleich mit. 😉

Wie so vieles im Leben, weiß man gewisse Dinge erst zu schätzen, wenn sie nicht mehr rund laufen.
Toi, toi, toi, dass quasi "im Schlaf" des Rätsels Lösung dich/euch finden wird! ✨

This entry was edited (17 hours ago)

mastodon - Link to source
Odborníci tvrdí, že drastické obrázky, neustálé rozhořčení a nepřetržitý příval negativních zpráv nás nejen rozrušují, ale také mění naši reakci na stres a poškozují duševní zdraví.
nationalgeographic.cz/veda/jak…

Apokalyptičtí jezdci útočí skrze zpravodajství. Co se s námi děje, když je vyhlížíme příliš často

National Geographic (www.nationalgeographic.cz)

mastodon - Link to source
Proton Mail suspended the account of a journalist writing for the hacker zine Phrack at the request of a cybersecurity agency, only reinstating the account after public outcry theintercept.com/2025/09/12/pr…

Proton Mail Suspended Journalist Accounts at Request of Cybersecurity Agency

The journalists were reporting on suspected North Korean hackers. Proton only reinstated their accounts after a public outcry.
Nikita Mazurov (The Intercept)

reshared this

mastodon - Link to source

Mary Trump: #Trump Rhetoric Ignites Violent Spiral in #America: youtube.com/watch?v=C6Zb4OgiSQ…

Chris Hedges: The Martyrdom of #CharlieKirk: youtube.com/watch?v=34_nScNLga…


Chris Hedges: The Martyrdom of Charlie Kirk

Martyrs are used by messianic movements to sanctify violence. To show any mercy or understanding toward the enemy is to betray the martyr and the cause the m...
YouTube
#Trump #america #charliekirk

mastodon - Link to source
Okay, fine. I caved. I Preordered an iPhone 17 Pro today. I have never been less excited about ordering a phone. I will never stop being bitter that i can't get a small iPhone anymore. I decided on the pro over the 17 because of the slightly larger battery and I figured the fancy camera might be helpful for Aira, Be My Eyes and all the other blindy related stuff I do with the camera. By the time I got in, the delivery date was Sep. 25 so I have a couple weeks to try to get happy about my big ass phone.

mastodon - Link to source

Thanks. Other states should follow immediately! c.im/@cdarwin/1151930651416428…

Chuck Darwin

2025-09-12 19:51:22

mastodon - Link to source

California lawmakers pass bill banning law enforcement officers from covering their faces
latimes.com/california/story/2…


California lawmakers pass bill banning law enforcement officers from covering their faces

The California Legislature on Thursday passed a pair of bills to prohibit on-duty law enforcement officers, including federal immigration agents, from masking their faces, and requires them to identify themselves.
Dakota Smith (Los Angeles Times)

mastodon - Link to source

The person arrested for Charlie Kirk's murder?

As Joyce Vance says,

"The suspect [is] a cisgender white man raised in a religious, Republican home."

So will Wall Street Journal and New York Times now apologize for promoting the lie about bullet casings left behind by the shooter that were marked with "transgender" symbols, whatever the jumping hell that means?

I doubt it.

#CharlieKirk #guns #violence
/1

joycevance.substack.com/p/trum…


Trump on Trials: How Our Legal System Shouldn't Work

Today, after Donald Trump announced it on Fox and Friends, law enforcement told the public it had apprehended a suspect who turned in after confessing to the murder of Charlie Kirk to his father, a former Sheriff’s Deputy and minister.
Joyce Vance (Civil Discourse with Joyce Vance)
#guns #violence #charliekirk
This entry was edited (1 day ago)
in reply to William Lindsey

mastodon - Link to source

William Lindsey

"Tyler Robinson comes from a Republican family. His father owns a business installing kitchen countertops and cabinets. His mother is a licensed social worker. His family is white, Mormon, and self-described as 'gun-toting.' There are endless photos of Tyler and his family with guns. His mother posted about him proudly."

~ Ben Meiselas

#CharlieKirk #Republicans #MAGA #Utah #guns #GunCulture #Trump #Mormon
/2

meidasplus.com/p/charlie-kirks…


Charlie Kirk’s Killer IN CUSTODY

The latest details
Ben Meiselas (Meidas+)
#Trump #MAGA #guns #Republicans #utah #charliekirk #gunculture #mormon
in reply to William Lindsey

mastodon - Link to source

William Lindsey

"He even dressed as Donald Trump for Halloween. The family wasn’t shy about their culture of guns, their politics, or their worldview.

This is who the killer is. This is what we now know. And yet Trump and his cronies immediately blamed the left."

#CharlieKirk #Republicans #MAGA #Utah #guns #GunCulture #Trump #Mormon
/3

#Trump #MAGA #guns #Republicans #utah #charliekirk #gunculture #mormon

mastodon - Link to source

Remember that white house executive order against DEIA, “diversity, equity, inclusion, and accessibility”?

They went out of their way to add the A for accessibility. So this is very sad but not surprising.

"Trump administration cuts funding to Oregon disability programs"

opb.org/article/2025/09/11/tru…

"Organizations across Oregon received notice from the U.S. Department of Education that they’d lose hundreds of thousands of dollars"

#Oregon #Disability #Accessibility #DisabilityJustice #Education

The U.S. Department of Education is ending grants to programs across Oregon that support students with disabilities, citing practices related to diversity, equity and inclusion. The cuts could make it harder for disabled students and their families to access help, especially in some of Oregon’s poorest rural communities.

Trump administration cuts funding to Oregon disability programs

Organizations across Oregon received notice from the U.S. Department of Education that they’d lose hundreds of thousands of dollars.
Bryce Dole | Kathryn Styer Martínez (OPB)
#Accessibility #education #Disability #DisabilityJustice #Oregon

mastodon - Link to source

Just watched a video of a memorial in London England for a racist American white nationalist where a group of Māori performed 'haka' (The Haka, the one everyone who is not from Aotearoa knows) for a group of UK MAGA shitheads.

I think I am losing my mind which is surprising as I don't remember finding it again. What the actual fuck is going on?

⇧